Application
L322

L322

 

L322

Main Features

Medium heat injection
Moulding, high flow
Good thermal
Stability during processing

Density: 1.04

Main Application

Domestic appliances
Thermal resistant items(front panels, frames etc.)
Electrical sector

Density: 1.04

Keys

Packaged product should be protected from the atmosferic agents and stored out of direct sunlight
NB: No Break
/M: Matt - Digit following letter
/M indicates increasing values of mattness

 

Properties

Test Condition

Test Methods

Units

 

General

       

Density

 

ISO 1183

g/cm3

1.04

Water Absorption

 

ASTM D 570

%

0.3

Rheological

       

Melt Flow Rate (MFR)

 

ISO 1133

g/10min

23

Mechanical

       

Tensile Strength

50 mm/min

ASTM D 638

MPa

45

Strain at break

50 mm/min

ASTM D 638

%

20

Flexural Strength

2 mm/min

ASTM D 790

MPa

69

Flexural Modulus

2 mm/min

ASTM D 790

MPa

2350

Izod Impact Strength Notched

+23°C - thickness 3.2 mm

ISO 180/4A

J/m

170

 

0°C - thickness 3.2 mm

ISO 180/4A

J/m

100

 

- 20°C - thickness 3.2 mm

ISO 180/4A

J/m

70

 

- 40°C - thickness 3.2 mm

ISO 180/4A

J/m

50

 

+23°C - thickness 4 mm

ISO 180/1A

kJ/m²

13

 

- 40°C - thickness 4 mm

ISO 180/1A

kJ/m²

6

Charpy Impact Strength, Notched

+23°C

DIN 53453

kJ/m²

10

Unnotched

+23°C

DIN 53453

kJ/m²

NB

Unnotched

- 40°C

DIN 53453

kJ/m²

NB

Rockwell Hardness

scale R

ISO 2039/2

kJ/m²

R109

Thermal

       

Vicat Softening Tempreture

10 N - 120°C/h

ISO 306/A120

ºC

99

 

50 N - 120°C/h

ISO 306/B120

ºC

96

Deflection temp. under load (annealed)

1.8 MPa - 120°C/h

ASTM D 648

ºC

96

Ceofficient of linear thermal expansion

 

ASTM D 696

10 -5/ºC

9

Thermal Conductivity

 

ASTM C 177

W/(Km)

0.17

Moulding Shrinkage

 

ISO 294.4

%

0.4-0.6

Flammability

       

Flame behavior

thickness 1.5 mm

UL 94

class

HB

Glow wire test

thickness 3 mm

IEC 60695-2-1

ºC

650

Electrical

       

Surface resistivity

dry

IEC 60093

ohm

10+14

Volume resistivity

dry

IEC 60093

ohm*cm

10+15

Dielectric strength

dry

IEC 60243

kV/mm

30

Dielectric constant (relative permittivity)

1000 Hz - dry

IEC 60250

 

3.1

Dissipation factor

1000 Hz - dry

IEC 60250

 

15*10-³

Packaging
Storage
Safety
تصاویر
  • L322
  • L322
  • L322
  • L322
  • L322
  • L322
  • L322
All rights of this website are reserved for Jam Petrochemical